Landowner Information

​The Abandoned and Orphan Well Plugging Program was established by the Oil and Gas Act of 1984 to address legacy wells across the commonwealth.  The program investigates and tracks legacy wells identified and classifies them according to the risk they pose to the community in which they are located.  Money is set aside from oil and gas well permits to fund legacy well plugging projects.  Although funding levels have proven inadequate to address all wells causing environmental impacts or other concerns, available funds are used to plug wells that pose the highest risk to public health, safety and the environment.

​DEP has an online mapping tool that you can use to view areas of interest.  The tool allows you to view known abandoned and orphan well locations around your property and can give you an idea if your property is in an area where historical oil and gas well drilling took place.  It is important to note that the majority of legacy wells will not be included in the mapping tool since they were drilled many decades prior to today’s reporting requirements and, therefore, are unknown to DEP.  This tool can be useful to see if your neighborhood may have had historic oil and gas development.  An example of historic oil and gas development and its relationship to current land use can be viewed on this interactive map.

​Legacy oil or gas wells do not have a standard appearance.  Sometimes wells identified by landowners are equipped with a well head and other equipment, such as piping and tanks. Many times, the well is so old that the equipment is no longer present, or it may simply appear as a rusty pipe sticking upright out of the ground.  There are times someone may have intentionally buried the well below ground surface. Wells have been identified during landscaping or construction work, within foundations or basements of homes, and have been used as yard decorations.   Abandoned oil and gas wells can be dangerous!  If you suspect a legacy well exists on your property, secure the area and contact your DEP District Oil and Gas Office immediately.  

​Abandoned oil and gas wells can be dangerous!  DO NOT attempt to modify the well in any way.  Do not attempt to open any valves or turn knobs.  Oil and gas wells may be isolating fluids under extremely high pressures; or may be capable of releasing explosive or toxic gases and should be considered dangerous.  Do not attempt to fill in a well with soil or any other material.  Do not remove or alter any piping above ground to hide it.

If an open hole is identified, prevent people from accidently encountering the hole by using blockades or other visual and/or physical deterrents.  Contact your DEP District Oil and Gas office to report the well.  Continue to read this guide to find out what information to collect and how to make sure you do not become responsible for the well.  

​Immediately contact the appropriate DEP District Oil and Gas office  for your area and let them know that you believe you may have a legacy well on your property.  In order to provide a more efficient response to your request, be prepared to give the following information to DEP personnel when you call. 

​Finding a well on your property or uncovering a buried well does not make you responsible for the well, however, attempts to produce the well, receive economic benefit, improperly rid your property of any evidence of the well, or other careless activities can make you financially responsible for the well.  For your safety, it is important that a DEP oil and gas representative evaluate the well and attempt to determine if a responsible company or individual exists.  If a responsible party exists, they will legally be required to properly decommission the well or bring it into compliance through some other action.

Although rules vary by location, buying a parcel of land that has legacy oil and gas wells on it generally does not mean you own or are responsible for the wells.  However, if an oil or gas company gives or sells a well to you as a landowner for use in heating a home, garage, barn or for some other “home-use” reason; all regulatory obligations, including well decommissioning, are transferred to you.  In these cases, the landowner becomes the responsible for the well and is required to file reports with the DEP each year and will also be responsible for plugging the well in accordance with the regulations after its useful life has ended.  Plugging an oil and gas well properly can be an expensive project.  DEP typically pays tens of thousands of dollars to decommission a well properly, and costs may exceed $100,000 depending on well conditions.  Careful consideration should be given to the amount of economic benefit available from the well versus the cost to manage and plug the well prior to agreeing to purchase or transfer a well into your name.  

​Before transferring an abandoned well into your name and making yourself responsible for it, the well should be evaluated by a professional who can assess the mechanical integrity of the well.  There also may be ownership interests tied to even an abandoned well, so a thorough investigation of ownership or operating interests of the well should be completed.  Additionally, the well may or may not supply enough gas to meet your needs. 

Before you begin using any well, please contact your DEP District Oil and Gas Office for assistance in having the well registered in your name, but keep in mind that there are obligations involved such as reporting annual production, assessing the well’s mechanical integrity, etc.; and as new owner/operator, you ultimately have the responsibility of plugging the well when it is no longer in use and may have to complete other regulatory obligations such as completing water supply investigations to ensure your well is not responsible for any kind of health, safety and environmental impacts.  Besides annual production reporting and plugging, the well is required to be bonded, if it was drilled after 1984.  It is important for you to know the full costs associated with the well before you decide to take responsibility for it by accepting a transfer or registering it under you name.

Private use of gas from a well for home, farm, business, or industrial plant subjects the owner or operator to all of DEP’s relevant statutes and regulations.  If you operate a well or have gas piped directly to your house from any producing well, you are responsible for your own safety; that is, safe control and use of the gas.  You are responsible for the piping, pressure regulators, and automatic shutoffs needed to keep the gas flowing properly and prevent leaks into your home.  Unlike gas from a utility company, natural gas coming directly from a well may have no odor.  When acquiring a house with a gas well, or installing a gas line from a well, please have a qualified professional utility contractor inspect the system and perform any installation or repair work needed.

​DEP is tasked with regulating oil and gas development under applicable environmental laws to ensure protection of public health, safety and the environment. Our jurisdiction does not extend to personal property rights such as mineral rights and leasing of mineral rights.  Therefore, we do not have the information or expertise to help with individual inquiries.  Click here for information for landowners relating to oil and gas development that may be some assistance to you, or through which you may find someone who is able to help you with your individual needs.  

​Please refer to the Natural Gas Wells Owned and Operated by Homeowners (PDF)

Your regional DEP District Office, where the well is located, is best suited to provide assistance on a variety of matters relating to oil and gas wells and applicable environmental laws and regulations.