Exceptions to labeling procedures must be approved by the PLCB in advance of shipment.

The PLCB retains the right to implement changes to labeling requirements at any time. When changes occur, the Vendor of Record will be notified and the information posted on the PLCB website.

To confirm labeling is acceptable prior to shipment, please contact the PLCB Labeling Coordinator at ra-lbscc@pa.gov.  

The PLCB requires the following information be on all cases of product received in any of our warehouses:

• The PLCB/State Code item number
• UPC
• A brief description of the product (including name, size and vintage or proof)
  
• Shipping Container Code (SCC) and barcode
  
• Consumer-readable freshness date on case, if freshness date is printed on the retail unit

The required information can be combined into one label if assembled and placed correctly. The information can be printed on the cartons in lieu of a label. In these instructions reference will be made to “labels” but it is understood that the same information and requirements also refers to printed cases.

• The label (if printed on paper as opposed to on the case surface) must be printed on WHITE paper.
  
  
• The PLCB will accept Multi State and/or National Alcoholic Beverage Control Association (NABCA) labels, so long as such labels conform to the standards identified herein. 
  
  
• If the retail unit displays a “freshness” date, this date and the related text must be printed on the case or the case label. Examples of a freshness date are: “Best By NN/NN/NN,” “Expires on NN/NN/NN,” and “This wine is best consumed by NN/NN/NN."
  
  
• The PLCB will accept Multi State and/or National Alcoholic Beverage Control Association (NABCA) labels in lieu of the PLCB/State label, as long as the information and specifications of that information is consistent with the PLCB requirements.

Affix the PLCB/State case code label in the upper left-hand corner of the narrow side of the case approximately one-half (1/2) inch from the edges to prevent fringing. 

NOTE: If the PLCB/State Label includes the SCC bar coding, the labels must be placed at the bottom of the case on adjacent sides as described below.

Label Size and Data

The actual size of the label should be a minimum of 4" H x 6" W.

Label Placement

• The SCC barcode must be placed on two adjacent sides of each case. Case labels needs to be placed on two adjacent sides, in the lower right hand corner on the short side of case and the adjacent long side. Labels should not be placed on the top or bottom of the cases. Labels must be visible to the receivers on all layers of the pallet.
  
  
• Bearer bars are acceptable either at the top or bottom or encompassing the entire SCC barcode, but they must not interfere with the size and placement of the barcode. 
   
  
• Do not place the SCC barcode to the immediate right or left of the UPC barcode.
  
  Example:

Placement Examples

SCC Number

Pennsylvania accepts only 14 digit Shipping Container Codes for the SCC number. SCC must be 14 digits long; no additional prefix or suffix digits.

It is the responsibility of the vendor to develop the SCC numbers for their items. The vendor is also responsible for notifying the proper person(s) at the PLCB with all SCCs as they are established. If a product is received with an SCC that is not in our system, the product will be relabeled as incorrect and surcharged to the vendor.

There is only one bar code symbology for the SCC-14 that the PLCB will accept. This is Interleaved 2-of-5. No other coding is currently scannable in the PLCB DCs. 

Freshness Dating

Any dated product where the freshness date is visible and legible to the consumer on the retail sale unit must also have that same date clearly visible on the exterior of each case. Consumer legible dates include “Best by,” “Use by,” “Consume by,” “Expires” or any other wording that reflects or implies freshness or expiration dates. 

Freshness date case label requirements:

• Pallets of the same item (unitized) should contain only one consumer date.
• The freshness date can be a separate label on the case, or integrated with the PLCB SCC label described above. If a separate label is printed, only one label is required on the case.
• The text should match what is printed on the retail unit ("Expires," "Best by," etc.).
• The date format should be MM-DD-YYYY.
• Font size should be minimum 3/4".
• The text must be printed on a contrasting area of the case (black ink on white label, etc.)

Surcharge/Penalty for Corrections 

Refusal or corrections to any shipment will be made by the sole discretion of the distribution center operator and on-site PLCB representative. If a shipment is received by the PLCB from a vendor bearing a PLCB/State and/or SCC label that is not formatted according to the aforementioned requirements and specifications, one bearing unrecognized coding, and/or labels not properly affixed to each case, the distribution of the merchandise to the retail locations will be withheld until the cases are properly identified and labeled. Corrections will be made by the distribution center operator.

Per case labeling charge will be applied to any labeling corrections as stated above.

Surcharges, which will include an Administration fee and may also include penalties, will be levied for failure to comply with these requirements.

Each contract operator has established a schedule of fees to relabel improperly marked cases.  Requests for fee schedules can be sent to ra-lbscc@pa.gov.